From box to live panel in minutes

Power it, name it, drop the plugin in your design. That's the whole setup.

Before you start

  • A QNode™ panel with power: PoE (preferred, single cable) or the included 12V supply
  • A network with DHCP (the panel picks up an address automatically)
  • Q-SYS Designer® 9.x or later on your PC
  • A Q-SYS® Core on the same network as the panel

Phase A

Power up the panel

1

Connect and power the panel

Plug in PoE, or the 12V barrel supply plus a network cable. The panel boots to its home screen.

2

Find its IP address

With DHCP, the panel shows its IP address right on the home screen. Note it, you will use it in the next step.

Phase B

First login to the web GUI

3

Open the panel's web GUI

Browse to https://<panel-ip> from any computer on the same network.

Heads up: Your browser will show a certificate warning the first time. This is expected, the panel uses a self-signed certificate for local HTTPS. Click Advanced and proceed.
4

Sign in with the factory defaults

Username admin, password myquancontrol (all lowercase).

Change it early: Every QNode ships with the same factory password, so change it before the panel goes into service. The panel enforces this: features like WiFi and Room Scheduling stay locked until the factory password has been changed.
5

Name your panel

In the web GUI, set the device name first (e.g. "Conference Rm 210"). This is the name that shows up in the plugin's discovery list, so naming panels before you open Designer makes a multi-panel install painless.

Phase C

Install the plugin and deploy

6

Download and install the plugin

Download QNodeController.qplugx and double-click it to install. If you run multiple versions of Q-SYS Designer®, right-click the file instead, choose Open With, and pick the Designer version you want it installed to.

Download Plugin
7

Find it in Designer

Open your design. In the Schematic Elements pane on the right, expand Plugins → User → MyQuan and you'll find QNode Controller. Drag and drop it into your design.

Tip: If Designer was already open when you installed, refresh the plugins list or restart Designer.
8

Check the plugin properties

Click the plugin and look at its Properties pane. Out of the box it's set to auto-everything:

  • •Connection Mode: Auto Discovery finds QNode panels on the network and lists them in a dropdown by the name you set in Step 5.
  • •UCI Mode: Browse lets you pick any UCI from your design in a dropdown.
  • •Device Model stays at QNode-10in/15in for current hardware.

Both can be switched to manual: Connection Mode: Manual gives you a typed IP/hostname field (use the address from Step 2), and UCI Mode: Token lets you paste a UCI access token instead of browsing. Set properties before you push the design, changing them later means a redeploy.

Separate VLANs? Auto Discovery uses network broadcast, so the Core and the panel need to be on the same subnet. If your panels live on a separate VLAN from the Core, use Manual mode with the panel's IP.
9

Connect and deploy

Push the design to your Core, open the plugin's UCI tab, pick your panel from the discovered devices dropdown (or confirm the IP in Manual mode), and connect. Choose the UCI you want on the panel and deploy it. The panel downloads the UCI and renders it natively. Done.

You're live. Now make it yours.

Everything below is built into every QNode™ panel. No licenses, no add-ons.

Room Scheduling

Connect the panel to Microsoft 365 or Exchange (EWS) from the web GUI for live availability and walk-up booking. Free in firmware 1.14.0 and later. Remember, the factory password must be changed first.

QPlayer™

Replace the idle black screen with your own designed content: images, video, text, live clock, and animations, built in the web GUI canvas editor.

LED, relays, serial

The plugin's LED, Triggers, and Serial tabs control the light ring, both relays, RS232 and RS485. All built in, all over the same network cable.

Keep firmware current

Grab the latest .mqf from the Support page and upload it in the web GUI. The panel updates and reboots itself. Firmware and plugin versions are released as matched pairs, so update both together.

Go to downloads

Troubleshooting

Auto Discovery uses broadcast, so the Core and the panel need to be on the same subnet. Check the panel is booted and on the network (its IP shows on the home screen), then use the Rescan button on the plugin's UCI tab. If your network separates the panel and the Core, switch to Manual mode and enter the panel's IP directly.
That's expected. The panel uses a self-signed certificate for local HTTPS, so the browser can't verify it against a public authority. Click Advanced and proceed. All traffic stays on your local network.
Change the factory default password first. That's by design: those features stay locked until the panel has a unique password. Set a new password in the web GUI and try again.
That's normal until a plugin connects and deploys a UCI. Check that the design is running on the Core and that the plugin shows connected. Once the plugin connects and deploys, the panel downloads and renders the UCI.

Stuck? We answer fast.

Reach out and you'll talk to the person who built QNode™.

Contact Us